Aluminum Cat-Way Roof Safety Aluminum Walkway
As the name suggests, aluminum walkway is made of aluminum, normal
is 6061-T6, the weight will be heavier than FRP and the quality is
also better. Normal thickness is 13mm and width and length can be
customized, hole size is 34X95cm and surface treatment is
anodizing.
As a new building material, aluminum grille is more and more widely
used, because it has many advantages that other materials. Aluminum
grille has no welding points, firm connection, light weight, high
strength, low energy consumption, corrosion resistance and other
characteristics, and is widely used in industrial, commercial,
civil and other fields.
Even if exposed to the sun, aluminum walkway will not have aging
and other problems affecting strength, so in terms of service life,
it will be much longer than FRP walkway. After 25 years, even if
the panels need to be replaced, the aluminum walkway can still be
used normally, or it can be recycled and sold as waste aluminum,
which has a certain value. Of course, because of these
characteristics, the cost will certainly be a little higher than
that of FRP.
Anyway, walkway is a very important auxiliary installation
materials for PV system on metal roof.
As a PV enterprise, Lipu Metal has been focusing on the R&D,
production and sales of solar mounting system and PV frames. Due to
Lipu Metal has a professional design and development team, so it
has obtained nearly 17 domestic and foreign product patents so far.
Professional production and QC team, which is strictly controlling
the quality from raw materials to finished products accordance with
the ISO9001 international quality system standards.
Lipu Metal can not only produce conventional PV mounting system
products and accessories, but also can offer the design which will
meet the customized needs. According to the situation of different
projects, Lipu Metal will provide matched mounting system
solutions. From the beginning of purchasing from Lipu Metal,
customers can enjoy a series of supporting services, including
field investigation, measurement & calculation, design,
installation support and after-sales service.
| Product name | Walkway or catway |
| Color | Nature |
| Shape | Customized |
| Tolerance | ±1% |
| Length | ≤6m or customized |
| Material | 6061 |
| Temper | T6 |
Project photo reference
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton
Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the
factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for
aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
 |  |  |  |  |
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
 |  |  |  |  |
