Heightened Metal Roof Mount system Tin Roof Commercial solar photovoltaic
system
In hot countries or regions, such as the Philippines, Singapore,
Thailand, etc., the temperature above the roof often exceeds 40℃ in
summer. In this case, when installing the photovoltaic system on
the roof, it is also necessary to consider how to better heat
dissipation. Therefore, when doing roof projects in these countries
and regions, some clients will ask to raise the bracket, so that
there is a larger space between the modules and the roof, so as to
achieve the effect of ventilation and heat dissipation.
Heightened solar mounting system is made up of roof clamp, support
leg, rail and mid/end clamps. The main material is high-strength
aluminum and stainless-steel bolts. The overall structure is
relatively light and will not cause a lot of pressure on the roof.
The roof clamp and support leg are customized according to detail
roof shape and size. The whole structure strength will be checked
according to GB and JIS to ensure safety.
In the photovoltaic system, the mounting system is not belong to
the category of standard products, LP SOLAR can design and produce
the matching products according to different use environment and
use requirements, Therefore, if you are not sure what type of
mounting system you need for your roof projects, please contact us
to provide the necessary design information according to our BOM
form and then LP SOLAR engineer team will offer the suitable
solutions.
Technical Data
Product Name | Heightened Mount |
| Application | Metal roof |
Material | High grade aluminum and A2-70 hardware |
Wind Load | 60 M/S |
Snow Load | 1.0 KN/M² |
Applicable Module | Framed or Frameless |
Module Orientation | Portrait or Landscape |
Standard | JISC8955:2017,GB50009-2012,GB50797-2012 |
Dimensions | Customized |
Warranty | 10 Years |
| Work life | 25 Years |
Project reference
