MGA4 Aluminum Solar Mounting System Solar Ground Mounting System
Cement Roof Mounting System
Utility model patent 201921877539.X
According to the different materials used for the main stressed
bars of photovoltaic supports, they can be divided into aluminum
alloy supports, steel supports and non-metallic supports, of which
non-metallic supports are rarely used, while aluminum alloy
supports and steel supports have their own characteristics.
The currently recommended one is the fixed tilt angle aluminum
photovoltaic mounting system. Generally, technicians will first
calculate the local optimal installation angle according to site
longitude and latitude, and then all arrays will be fixed and
installed with this angle. Of course, when the land area is
limited, in order to achieve a certain installed capacity,
sometimes the best inclination will be abandoned. The power
generation efficiency of the optimum inclination angle and the
power generation efficiency of the non-optimum inclination angle do
not have a double relationship.
According to the size of the project and the land conditions, it
can be used with ground piles or concrete base as the foundation.
If the ground pile is selected, the installer needs to take samples
on site for pulling force test to ensure that the selected size can
meet the strength requirements.
As a PV enterprise, Lipu Metal has been focusing on the R&D,
production and sales of solar mounting system and PV frames. Due to
Lipu Metal has a professional design and development team, so it
has obtained nearly 17 domestic and foreign product patents so far.
Professional production and QC team, which is strictly controlling
the quality from raw materials to finished products accordance with
the ISO9001 international quality system standards.
Lipu Metal can not only produce conventional PV mounting system
products and accessories, but also can offer the design which will
meet the customized needs. According to the situation of different
projects, Lipu Metal will provide matched mounting system
solutions. From the beginning of purchasing from Lipu Metal,
customers can enjoy a series of supporting services, including
field investigation, measurement & calculation, design,
installation support and after-sales service.
Technical specification
| Installation place | Cement roof or flat ground |
| Fixed way | Ground screw/Concrete base |
| Installation angle | 5°~45° |
| Standard wind | 35m/s |
| Max wind | 88m/s |
| Max snow | 1200mm |
| Design standard | JISC 8955:2017,GB 50009-2012,GB 50797-2012 |
| Main material | AL6005-T5 |
| Fastener material | SUS 304 |
Advantage
Strong compatibility
High cost performance
High-strength aluminum
Easy to install
Project Photo reference
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton
Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the
factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for
aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
 |  |  |  |  |
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
 |  |  |  |  |
About Certification and Test
