Monopole Steel Ground Mounting System Solar Power Station Solar Photovoltaic
System
In the installation environment, when the size of the construction
site is limited or the foundation position is difficult to do, the
monopole adjustable photovoltaic support is a good choice. It can
adapt to the complex installation and construction environment, and
it is convenient to adjust the angle. It can be fixed at the
positions of 10 °, 20 ° and 30 ° to approach the best installation
angle of the project site.
The structure of Double Inclined Beams and double diagonal supports
increases the stress area, apportions the pressure of the storm or
blizzard on the structure, and makes the safety of the structure
more reliable. The structure can take 2, 4 or 6 modules as a unit,
and multiple units can be spliced to form a larger array to meet
the needs of different use environments.
LP SOLAR engineer team can offer customized design according to
customers’ actual project site conditions and use requirements, the
weight of photovoltaic modules, wind load, snow load and other
different load combination conditions, pile foundation stress and
purlin deflection, and considered the height to thickness ratio of
purlin and photovoltaic module installation angle, and combined
with the situation of materials on the market, then recommend the
cost-effective solutions for you.
Technical Data
Product Name | Monopole Steel Ground Mounting system |
| Application | Land |
Material | Steel and A2-70 hardware |
Wind Load | 60 M/S |
Snow Load | 1.0 KN/M² |
Applicable Module | Framed or Frameless |
Module Orientation | Portrait |
Standard | JISC8955:2017, GB50009-2012, GB50797-2012 |
Dimensions | Customized |
Warranty | 10 Years |
| Work life | 25 Years |
Advantage
1,Strong compatibility
2,High cost performance
3,High-strength carbon steel
Strength Analysis reference
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton
Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the
factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for
aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
 |  |  |  |  |
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
 |  |  |  |  |
